Neutron Reflectometry in Russia: Current State and Prospects

Crystallography Reports - The review is devoted to the current state of affairs and prospects for development in the field of neutron reflectometry on the existing and future neutron sources in the...     

Comprehensive performance of a ball-milled La0.5Pr0.5Fe11.4Si1.6B0.2Hy/Al magnetocaloric composite

Due to the hydrogen embrittlement effect, La(Fe,Si)₁₃-based hydrides can only exist in powder form, which limits their practical application. In this work, ductile and thermally conductive Al metal was homogeneously mixed with La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2 using the ball milling method. Then hydrogenation and compactness shaping of the magnetocaloric composites were performed in one step via a sintering process under high hydrogen pressure. As the Al content reached 9 wt.%, the La_0.5Pr_0.5Fe_11.4Si_1.6B_0.2H_y/Al composite showed the mechanical behavior of a ductile material with a yield strength of ~44 MPa and an ultimate strength of 269 MPa accompanied by a pronounced improvement in thermal conductivity. Due to the ease of formation of Fe-Al-Si phases and the several micron and submicron sizes of the composite particles caused by ball milling process, the magnetic entropy change of the composites was substantially reduced to ~1.2 J/kg· K-1.5 J/kg· K at 0 T-1.5 T.     

The visible and ultraviolet organic light-emitting diodes with germanium dioxide as facile solution-processed anode buffer layer

Germanium dioxide (GeO₂) aqueous solutions are facilely prepared and the corresponding anode buffer layers (ABLs) with solution process are demonstrated. Atomic force microscopy, X-ray photoelectron spectroscopy and ultraviolet photoelectron spectroscopy measurements show that solution-processed GeO₂ behaves superior film morphology and enhanced work function. Using GeO₂ as ABL of organic light-emitting diodes (OLEDs), the visible device with tris(8-hydroxy-quinolinato)aluminium as emitter gives maximum luminous efficiency of 6.5 cd/A and power efficiency of 3.5 lm/W, the ultraviolet device with 3-(4-biphenyl)-4-phenyl-5-tert-butylphenyl-1,2,4-triazole as emitter exhibits short-wavelength emission with peak of 376 nm, full-width at half-maximum of 42 nm, maximum radiance of 3.36 mW/cm² and external quantum efficiency of 1.5%. The performances are almost comparable to the counterparts with poly (3,4-ethylenedioxythiophene):poly (styrenesulfonate) as ABL. The current, impedance, phase and capacitance as a function of voltage characteristics elucidate that the GeO₂ ABL formed from appropriate concentration of GeO₂ aqueous solution favors hole injection enhancement and accordingly promoting device performance.     

Toward Understanding the Enhanced Pseudocapacitive Storage in 3D SnS/MXene Architectures Enabled by Engineered Surface Reactions

The optimization of three-dimensional (3D) MXene-based electrodes with desired electrochemical performances is highly demanded. Here, a precursor-guided strategy is reported for fabricating the 3D SnS/MXene architecture with tiny SnS nanocrystals (≈5 nm in size) covalently decorated on the wrinkled Ti₃C₂T_x nanosheets through Ti−S bonds (denoted as SnS/Ti₃C₂T_x-O). The formation of Ti−S bonds between SnS and Ti₃C₂T_x was confirmed by extended X-ray absorption fine structure (EXAFS). Rather than bulky SnS plates decorated on Ti₃C₂T_x (SnS/Ti₃C₂T_x-H) by one-step hydrothermal sulfidation followed by post annealing, this SnS/Ti₃C₂T_x-O presents size-dependent structural and dynamic properties. The as-formed 3D hierarchical structure can provide short ion-diffusion pathways and electron transport distances because of the more accessible surface sites. In addition, benefiting from the tiny SnS nanocrystals that can effectively improve Na⁺ diffusion and suppress structural variation upon charge/discharge processes, the as-obtained SnS/Ti₃C₂T_x-O can generate pseudocapacitance-dominated storage behavior enabled by engineered surface reactions. As predicted, this electrode exhibits an enhanced Na storage capacity of 565 mAh g⁻¹ at 0.1 A g⁻¹ after 75 cycles, outperforming SnS/Ti₃C₂T_x-H (336 mAh g⁻¹), SnS (212 mAh g⁻¹), and Ti₃C₂T_x (104 mAh g⁻¹) electrodes.     

Dehydrohalogenation of isomeric 2- and 3-bromomethyl substituted 2,3-dihydrooxazolo[3,2-a]pyridines

1. Download : Download high-res image (103KB)
2. Download : Download full-size image

     

Influence of β-cyclodextrin complexation on photochemistry of bisphenols in aqueous solutions

1. Download : Download high-res image (117KB)
2. Download : Download full-size image

     

Electrochemically Assisted Cycloaddition of Carbon Dioxide to Styrene Oxide on Copper/Carbon Hybrid Electrodes: Active Species and Reaction Mechanism

A novel electrochemically assisted cycloaddition process is proposed, in which highly efficient coupling of CO₂ with styrene oxide (SO) can be achieved to form styrene carbonate (SC) as a high-value-added product. A series of Cu catalysts with different morphologies and chemical states were fabricated on carbon paper (CP) by using in-situ electrodeposition, and the sample with nano-dendrimer structure was found to exhibit a relatively high activity of 74.8 % SC yield with 92.7 % SO conversion under gentle reaction conditions, thus showing its potential for practical applications. The relatively high electrochemically active surface area and charge transfer ability of dendrimer-like Cu benefited the electrochemical reaction. In particular, the Cu²⁺ species that were formed in situ during the reaction played a vital role in enhancing the activity and selectivity of the proposed Cu/CP hybrid catalyst. Cu²⁺ atoms served as active sites that can not only electrochemically activate CO₂ but also facilitate the ring opening of SO. Mechanistic analysis suggested that the reaction followed electrochemical and liquid-phase heterogeneous paths, which provide a new green and sustainable route for efficient utilization of CO₂ resources for fine chemical electrosynthesis.     

Templated synthesis and assembly with sustainable cellulose nanomaterial for functional nanostructure

Cellulose - Templated synthesis and assembly for nanostructured materials with tailored properties have received considerable attention. The powerful templates with predefined structures can guide...